 
 |
Preppy Monogram Decals will work on almost all flat surfaces. Use your monogrammed decal on walls, glass, laptops, cell phone, or any flat surface you want to personalize! 1. Measure the area of the surface where you want to apply the decal to ensure that the decal will fit before removing the backing. Make sure to find the center of the area so you can align your decal correctly. 2. Ensure that the surface where you will apply the decal is clean and dry. 3. Remove the backing and stick the top portion of the transfer paper that the decal is on to the surface where you are applying the decal. Step back and look at the decal from a distance to ensure that it is straight before pressing down on the entire decal. 4. Once you are sure it is straight, use a credit card or something with a hard edge to apply the decal and remove any air bubbles. Decals are very sticky so make sure to do this slowly and ensure that everything is straight and bubble free. 5. Slowly pull the transfer paper away from the decal, starting with a corner and pulling at an angle. If it appears that the decal is pulling away as well, simply reapply the transfer paper back and try rubbing on the decal again to ensure it is completely applied, then continue to remove the transfer paper. If you have any questions about decal application, feel free to contact us. |
|